GPS Geodetic Sanding T7 GNSS Receiver

 

 

GPS Geodetic Sanding T7 GNSS Receiver

Fitur GPS Geodetic Sanding T7

  • Performa GNSS yang luar biasa
  • Tautan radio jarak jauh
  • Portabilitas terbaik
  • Pengukuran Bebas Hambatan
  • Desain inovatif
  • Survei IMU (Opsional)

 

GPS Geodetic Sanding T7 adalah sistem penerima GNSS dengan fungsi yang penuh dan desain yang lebih ringkas serta berperforma lebih tinggi, selain desainnya yang kokoh untuk menahan benturan dan getaran.

 

 

Description

GPS Geodetic Sanding T7 GNSS Receiver dapat melacak sinyal dari semua konstelasi, termasuk sinyal B3 dari satelit BDS.

Sanding T7 dilengkapi teknologi pengukuran inersia, yang memungkinkan pengguna melakukan survei kemiringan dengan sudut kemiringan maksimum 60°. Centering tidak wajib, sehingga surveyor dapat berada pada posisi yang aman saat melakukan pengukuran di jalan raya dan tidak perlu masuk ke dalam air.

 

Fitur Sanding T7 GNSS Receiver

  • Performa GNSS yang luar biasa
  • Tautan radio jarak jauh
  • Portabilitas tertinggi
  • Pengukuran Bebas Hambatan
  • Desain inovatif
  • Survei IMU (Opsional)

 

Spesifikasi GPS Geodetic Sanding T7 GNSS Receiver

Satellite Signals
Signal tracking 965 channels
GPS: L1, L1C, L2C, L2P, L5
GLO: G1, G2, G3
BDS: BDS-2: B1I, B2I, B3I BDS-3: B1I, B3I, B1C, B2a, B2b*
GAL: E1, E5A, E5B, E6C, AltBOC*
QZSS:L1, L2C, L5*
SBAS:L1*
IRNSS:L5*
MSS L-Band(Reserve)
GNSS features Positioning output rate:1Hz~20Hz
Initialization time:<10s
Initialization reliability:>99.99%
Positioning precision
Code differential GNSS positioning Horizontal: ±0.25m+1ppm Vertical: ±0.50m+1ppm
SBAS positioning accuracy: Typically<5m 3DRMS
Static GNSS surveying H: ±2.5mm+0.5ppm | V: ±5mm+0.5ppm
Real-time kinematic surveying H: ±8mm+1ppm | V: ±15mm+1ppm
Network RTK H: ±8mm+0.5ppm | V: ±15mm+0.5ppm
IMU tilt compensation 10mm + 0.7 mm/° tilt down to 30°
IMU tilt angle 0°~60°
User interaction
Operaing system Linux
Buttons One button operation
Indicators Four indicate lights
Web UI Freely to configure and monitor the receiver by accessing to the web server via Wi-Fi and USB
Voice guide iVoice intelligent voice technology provides status and voice guide
Supporting Chinese, English, Korean, Russian, Portuguese, Spanish, Turkish and user define
Secondary development Providing secondary development package
Hardware performance
Dimension 135mm(Diameter)x84.75mm(Height)
Weight 0.97kg (battery included)
Material Magnesium aluminum alloy shell
Operating  -45°C~+70°C
Storag  -55°C~+85°C
Humidity 100% Non-condensing
Waterproof/Dustproof IP68 standard, protected from long time immersion to depth of 1m
IP68 standard, fully protected against blowing dust
Shock and vibration Withstand 2 meters pole drop onto the cement ground naturally
Power Supply 9-25V DC, overvoltage protection
Battery Internal Li-on, 6800mAh, 3.7V
Battery life Static mode 10 h, Rover mode 8h,Base mode 8h
Communications
I/O port 5PIN LEMO external power port + RS232, 7PIN external USB(OTG)+Ethernet
1 radio antenna interface
Wireless modem Built-in radio, 1W/2W/3W switchable, typically work range can be 8KM
Radio repeater
Frequency Range 410-470MHz
Communication Protocol Farlink, Trimtalk450s, SOUTH, HUACE, Hi-target, Satel
Double Module Bluetooth BLEBluetooth 4.0 standard, support for android, ios cellphone connection
Bluetooth 2.1 + EDR standard
NFC Communication Automatic pair between receiver and controller
(controller equipped NFC wireless communication module needed)
WIFI
Standard 802.11 b/g standard
WIFI Hotspot The WIFI hotspot allows any mobile terminal to connect and access to the internal webserver for the control and moditor receiver
WIFI data link To work as the datalink that receiver is able to broadcast and receive differential data via WIFI
Data storage/ Transmission
Data Storage 8GB SSD internal storage
Support external USB storage and automatical cycle storage
Changeable record interval, up to 50Hz raw data collection
Data Transmission USB data transmission, supporting FTP/HTTP data download
Data Format Differential data format: CMR+, CMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2
GPS output data format: NMEA 0183, PJK plane coordinates, Binary code, Trimble GSOF
Network model support: VRS, FKP, MAC, fully support NTRIP protocol
Inertial sensing system
Tilt survey(Optional) Built-in tilt compensator, correcting coordinates automatically according to the tilt direction and angle of the centering rod
Electronic bubble Controller software display electronic bubble, checking leveling status of the centering rod real time
Thermometer Built-in thermomter sensors, adopting intelligent temperature control technology which can monitor and adjust the temperature of receiver in real time

 

 

Paket Pembelian

  • Base Receiver
  • Rover Receiver
  • Radio Eksternal
  • Conttroller
  • Dan ACC Lainya

 

GPS Geodetic Sanding T7 GNSS Receiver   >>>>  Spec sheet (PDF)

 

About the Author

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

You may also like these