Fusion Splicer Sumitomo T-82C+

Fusion splicer pertama di dunia dengan Konektivitas LAN Nirkabel
Aplikasi ponsel pintar SumiCloud®. untuk mendukung pekerjaan penyambungan
Panel sentuh lebar dan beresolusi tinggi -5″ layar sentuh LCD berwarna
Waktu sambungan 5 detik lebih cepat dalam Mode Cepat SM
Mengurangi waktu penyusutan panas 8 detik
Berat 2,2 kg dengan baterai untuk 320 sambungan & siklus panas
Pengoperasian yang mudah seperti ponsel pintar
Kartu WLSD menghadirkan layanan SumiCloud® ke splicer Anda melalui Aplikasi ponsel pintar kami.

Description

Fusion Splicer Sumitomo T-82C+ adalah Alat Penyambungan serat optik dengan memanfaatkan panas untuk meleburkan kedua ujung kabel optik secara bersamaan dengan waktu yg sangat singkat.

Fitur Sumitomo Type-82C+

PENAMPILAN LUAR BIASA

Kerugian penyambungan SMF 0,01dB (Khas)
Oven independen ganda yang dioptimalkan sepenuhnya

MUDAH DIGUNAKAN

Pengoperasian panel sentuh dengan UI terbaru
Masa pakai baterai yang lama untuk koneksi 320 dan siklus panas

DURABILITAS LINGKUNGAN TINGGI

Ketangguhan lapangan yang terbukti

Spesifikasi Fusion Splicer Sumitomo T-82C+

Optical fiber requirements
Material	Silica glass
Profile types	SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657), EDF
Fiber diameter	Cladding diameter: 80 µm ~ 150 µm, Coating diameter: 100 µm ~ 1,000 µm
Applicable fiber or cable size	up to φ1,000 µm	Drop cable (2.0×3.1 mm), Indoor cable (2.0×2.0 mm)
Cleave length	5~16 mm	10 mm
Standard performance
Splice loss (typical)	SMF: 0.01 dB, MMF: 0.01 dB, DSF: 0.034 dB, NZDSF: 0.03 dB
Splicing cycle time (typical)	5 sec. (Quick mode), 7 sec. (SMF standard mode), 7 sec. (Auto mode)
Heating cycle time (typical)	8 sec.
Splice & Heat cycles	Approx. 300
Fiber view & magnification	Two CMOS cameras observation, 380X (zoom: 760X) for X or Y single axis view, 270X for both X & Y dual axis view
Splicing programs	Max. 320
Heating programs	Max. 100
Functions
Loss estimation	Provided
Splice image capture / Splice data storage	200 images / 10,000 splice data
Proof test	1.96N (200 gf)
Universal clamps for 250µm, 900µm tight & loose buffer fiber	Provided
Reversible coating clamps	Provided
Dual automatic independent heaters	Provided (US patent 7,412,146)
User-selectable heater clamp operation	Provided
Onboard user training video	Provided
Automatic arc calibration	Automatically compensates for environmental condition changes
Arc test	Provided
Display of remaining Splice & Heat cycles	Provided (Battery mode)
Remote interactive maintenance	Provided
Terminals
DC output	DC12 V (for JR-6)
USB port	USB 2.0 (mini-B type)
Storage media	SD / SDHC memory card
Power supply
AC input	100 ～ 240V, 50 / 60 Hz (ADC-1430)
DC input	10 ～15 V
Battery module	Li-ion 10.8 V, 6,400 mAh (BU-16)
Mechanical Parameters
Monitor	5.0″ touch screen color LCD display
Size	128(W) x 154(D) x 130(H) mm (without anti-shock rubber)
Weight	1.9 kg (without battery), 2.2 kg (with battery)
Electrode life	3,000 arc discharges
Environment
Operating conditions	Altitude 0～6,000 m, Temperature -10～+50°C, Humidity 0～95% (non-condensing), Wind velocity up to 15 m/s
Storage conditions	Temperature -40～+80°C, Humidity 0～95% (non-condensing), Battery -20～+30°C (long term)
Dust resistance	Equivalent to IP5x (Operates normally after 8 hours in a dust chamber (containing dust of particle size 25 µm or below
Water resistance	Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°)
Shock resistance	Drop from 76cm on 5 faces (excluding top face)