Konektor Andrew L4TNM-PSA berukuran 1/2 Inch banyak digunakan untuk Perangkat Repeater (Radio Pancar Ulang).
- Type: N-Male
- Panjang 76,71 mm | 3,020 inci
- Diameter 22,35 mm | 0,880 inci
- Ukuran Nominal 1/2 in
Konektor Andrew L4TNM-PSA N-Male 1/2 Inch
Konektor Andrew L4TNM-PSA N-Male Positive Stop™ for 1/2 inch AL4RPV-50, LDF4-50A, HL4RPV-50 cable.
Product Classification | ||||
Product Type | Wireless and radiating connector | |||
Product Brand | HELIAX® | Positive Stop™ | |||
Ordering Note | CommScope® standard product (Global) | |||
General Specifications | ||||
Body Style | Straight | |||
Cable Family | AL4-50 | |||
Harmonized System (HS) Code | 854420 (Coaxial cable and other coaxial electric conductors) | |||
Inner Contact Attachment Method | Captivated | |||
Inner Contact Plating | Silver | |||
Interface | N Male | |||
Mounting Angle | Straight | |||
Outer Contact Attachment Method | Ring-flare | |||
Outer Contact Plating | Trimetal | |||
Dimensions | ||||
Length | 76.71 mm | 3.020 in | |||
Diameter | 22.35 mm | 0.880 in | |||
Nominal Size | 1/2 in | |||
Electrical Specifications | ||||
3rd Order IMD at Frequency | -116 dBm @ 910 MHz | |||
3rd Order IMD Test Method | Two +43 dBm carriers | |||
Insertion Loss, typical | 0.05 dB | |||
Average Power at Frequency | 0.6 kW @ 900 MHz | |||
Cable Impedance | 50 ohm | |||
Connector Impedance | 50 ohm | |||
dc Test Voltage | 2000 V | |||
Inner Contact Resistance, maximum | 2 mOhm | |||
Insulation Resistance, minimum | 5000 mOhm | |||
Operating Frequency Band | 0 – 8800 MHz | |||
Outer Contact Resistance, maximum | 0.3 mOhm | |||
Peak Power, maximum | 10 kW | |||
RF Operating Voltage, maximum (vrms) | 707 V | |||
Shielding Effectiveness | -130 dB | |||
Return Loss/VSWR | ||||
Frequency Band | VSWR | Return Loss (dB) | ||
45–1000 MHz | 1.03 | 39 | ||
1010–2200 MHz | 1.03 | 37 | ||
2210–3000 MHz | 1.05 | 33 | ||
3010–4000 MHz | 1.1 | 27 | ||
4010–6000 MHz | 1.26 | 19 | ||
6010–8000 MHz | 1.33 | 17 | ||
Mechanical Specifications | ||||
Attachment Durability | 25 cycles | |||
Connector Retention Tensile Force | 889.64 N | 200.000 lbf | |||
– Torque | 5.42 N-m | 47.998 in lb | |||
Coupling Nut Proof Torque | 4.52 N-m | 39.997 in lb | |||
– Retention Force | 444.82 N | 100.000 lbf | |||
– Method | MIL-C-39012C-3.25, 4.6.22 | |||
Insertion Force | 66.72 N | 15.000 lbf | |||
– Method | MIL-C-39012C-3.12, 4.6.9 | |||
Interface Durability | 500 cycles | |||
– Method | IEC 61169-16:9.5 | |||
Mechanical Shock Test Method | MIL-STD-202, Method 213, Test Condition I | |||
Environmental Specifications | ||||
Operating Temperature | -55 °C to +85 °C (-67 °F to +185 °F) | |||
Storage Temperature | -55 °C to +85 °C (-67 °F to +185 °F) | |||
Corrosion Test Method | MIL-STD-1344A, Method 1001.1, Test Condition A | |||
Immersion Depth | 1 m | |||
– Test Mating | Unmated | |||
– Test Method | IEC 60529:2001, IP68 | |||
Moisture Resistance Test Method | MIL-STD-202F, Method 106F | |||
Thermal Shock Test Method | MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C | |||
Vibration Test Method | IEC 60068-2-6 | |||
Water Jetting Test Mating | Unmated | |||
– Method | IEC 60529:2001, IP66 | |||
Packaging and Weights | ||||
Weight, net | 94.71 g | 0.209 lb |
Konektor Andrew L4TNM-PSA N-Male >>>>>> Spec sheet (PDF)