Konektor Andrew L4TDM-PS 7-16 DIN Male
Konektor Andrew L4TDM-PS DIN Male berukuran 1/2 in banyak digunakan untuk Radio Komunikasi. Khususnya untuk Perangkat Repeater (Radio Pancar Ulang).
- Ukuran Nominal 1/2 in
- Diameter 29,01 mm | 1,14 inci
- Panjang 74,96 mm | 2,95 inci
- Berat 111,60 g | 0,25 lb
Konektor Andrew L4TDM-PS 7-16 DIN Male Positive Stop™ for 1/2 in LDF4-50A cable.
General Specifications
- Body Style: Straight
- Cable Family: LDF4-50A
- Inner Contact Attachment Method: Captivated
- Inner Contact Plating: Silver
- Interface: 7-16 DIN Male
- Mounting Angle: Straight
- Outer Contact Attachment Method: Ring-flare
- Outer Contact Plating: Trimetal
- Pressurizable: No
Dimensions
- Length: 68.07 mm | 2.68 in
- Diameter: 36.07 mm | 1.42 in
Electrical Specifications
- 3rd Order IMD at Frequency: -120 dBm @ 910 MHz
- 3rd Order IMD Test Method: Two +43 dBm carriers
- Insertion Loss, typical: 0.05 dB
- Average Power at Frequency: 1.1 kW @ 900 MHz
- Cable Impedance: 50 ohm
- Connector Impedance: 50 ohm
- dc Test Voltage: 4000 V
- Inner Contact Resistance, maximum: 0.8 mOhm
- Insulation Resistance, minimum: 5000 MOhm
- Operating Frequency Band: 0 – 8800 MHz
- Outer Contact Resistance, maximum: 1.5 mOhm
- Peak Power, maximum: 40 kW
- RF Operating Voltage, maximum (vrms): 1415 V
- Shielding Effectiveness: -110 dB
Mechanical Specifications
- Attachment Durability: 25 cycles
- Connector Retention Tensile Force: 889.64 N | 200 lbf
- Connector Retention Torque: 5.42 N-m | 47.998 in lb
- Coupling Nut:
- Proof Torque: 25 N-m | 221.269 in lb
- Retention Force: 1000 N | 224.81 lbf
- Retention Force Method: MIL-C-39012C-3.25, 4.6.22
- Insertion:
- Force: 200.17 N | 45 lbf
- Force Method: IEC 61169-1:15.2.4
- Interface:
- Durability: 500 cycles
- Durability Method: IEC 61169-4:9.5
- Mechanical Shock Test Method: MIL-STD-202, Method 213, Test Condition I
Environmental Specifications
- Operating Temperature: -55 °C to +85 °C (-67 °F to +185 °F)
- Storage Temperature: -55 °C to +85 °C (-67 °F to +185 °F)
- Attenuation, Ambient Temperature: 20 °C | 68 °F
- Average Power, Ambient Temperature: 40 °C | 104 °F
- Corrosion Test Method: MIL-STD-1344A, Method 1001.1, Test Condition A
- Immersion:
- Depth: 1 m
- Test Mating: Unmated
- Test Method: IEC 60529:2001, IP68
Konektor Andrew L4TDM-PS 7-16 DIN Male >>> Spec sheet (PDF)
