Konektor Andrew L6TDM-PS 7-16 DIN Male

Konektor Andrew L6TDM-PS 7-16 DIN Male

Konektor Andrew L6TDM-PS 7-16 DIN-Male ukuran 1-1/4 Inch berkualitas tinggi didesain untuk aplikasi pada pesawat radio BTS seluler & pemancar stasiun televisi.

 

  • Interface: 7-16 DIN Male
  • Merek: HELIAX® | Positif Stop ™
  • Ukuran Nominal: 1 1/4 in
  • Diameter: 51,21 mm | 2,02 inci
  • Panjang: 89.00 mm | 3,50 inci
  • Berat: 650.00 g | 1,43 pon

 

Description

Konektor Andrew L6TDM-PS 7-16 DIN-Male Positive Stop™ for 1-1/4 in LDF6-50.

General Specifications

  • Body Style: Straight
  • Cable Family LDF6-50
  • Inner Contact:
    • Attachment Method: Captivated
    • Plating: Silver
  • Interface: 7-16 DIN Male
  • Mounting Angle: Straight
  • Outer Contact:
    • Attachment Method: Ring-flare
    • Plating: Trimetal
  • Pressurizable: No

Dimensions

  • Length: 91.95 mm | 3.62 in
  • Diameter: 51.31 mm | 2.02 in
  • Nominal: Size 1-1/4 in

Electrical Specifications

  • 3rd Order IMD at Frequency: -120 dBm @ 910 MHz
  • 3rd Order IMD Test Method: Two +43 dBm carriers
  • Insertion Loss, typical: 0.05 dB
  • Average Power at Frequency: 3.0 kW @ 900 MHz
  • Cable Impedance: 50 ohm
  • Connector Impedance: 50 ohm
  • dc Test Voltage: 4000 V
  • Inner Contact Resistance, maximum: 0.8 mOhm
  • Insulation Resistance, minimum: 5000 MOhm
  • Operating Frequency Band: 0 – 3300 MHz
  • Outer Contact Resistance, maximum: 1.5 mOhm
  • Peak Power, maximum: 40 kW
  • RF Operating Voltage, maximum (vrms): 1415 V
  • Shielding Effectiveness: -130 dB

Mechanical Specifications

  • Attachment Durability: 25 cycles
  • Connector Retention:
    • Tensile Force: 1,779.29 N | 400 lbf
    • Torque: 10.85 N-m | 96.004 in lb
  • Coupling Nut:
    • Proof Torque: 24.86 N-m | 220.003 in lb
    • Retention Force: 1,000.85 N | 225 lbf
    • Retention Force Method: MIL-C-39012C-3.25, 4.6.22
  • Insertion:
    • Force: 200.17 N | 45 lbf
    • Force Method: IEC 61169-1:15.2.4
  • Interface:
    • Durability: 500 cycles
    • Durability Method: IEC 61169-16:9.5
  • Mechanical Shock Test Method: MIL-STD-202F, Method 213B, Test Condition C

Environmental Specifications

  • Operating Temperature: -55 °C to +85 °C (-67 °F to +185 °F)
  • Storage Temperature: -55 °C to +85 °C (-67 °F to +185 °F)
  • Attenuation, Ambient Temperature: 20 °C | 68 °F
  • Average Power, Ambient Temperature: 40 °C | 104 °F
  • Corrosion Test Method: MIL-STD-1344A, Method 1001.1, Test Condition A
  • Immersion:
    • Depth: 1 m
    • Test Mating: Unmated
    • Test Method: IEC 60529:2001, IP68
  • Moisture Resistance Test Method: MIL-STD-202F, Method 106F
  • Thermal Shock Test Method: MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C
  • Vibration Test Method: MIL-STD-202F, Method 204D, Test Condition B
  • Water Jetting:
    • Test Mating: Unmated
    • Test Method: IEC 60529:2001, IP66

Konektor Andrew L6TDM-PS 7-16 DIN Male 1-1/4 in  >>>>>  Spec sheet (PDF)

About the Author

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

You may also like these