Lutron HV-40 High Voltage Probe

 

 

Lutron HV-40 High Voltage Probe

High Voltage Probe Lutron HV-40

  • DC : 0 to 40 KV, AC : 28 KV rms.
  • 1000 M input impedance, 1/1000 att.
  • DCV : 1% (1 to 20 KV), 1.5% (>20kV).
  • ACV : 5 % (>1 KV, 50/60Hz).
  • Size : 340 x 30 x 30 mm.

 

 

 

 

Description

Lutron HV-40 High Voltage Probe

 

Features: 

  • Attenuate Ratio: 1 : 1,000
  • Input Impedance: Approx. 1,000 MΩ
  • Output: Around 1.1 MΩ. The input impedance of external voltmeter
  • Impedance: should be 10 MΩ
  • Safety: Meet CAT II 40000 V
  • Max. Working Voltage:
    • DC: 40 KV
    • AC: Peak 40 KV or 28 KV rms (depend which values is larger)
  • Accuracy:
    • DCV: 1 KV to 20 KV – 1 %, 20 KV to 40 KV – 1.5 %
    • ACV: 1 to 28 KV rms, 50/60 Hz – 5 %
  • Temp Coefficient: Less than 200 ppm
  • Operating Temperature: 0 to 50°C
  • Operating Humidity: Less than 80% RH
  • Cable Length: 1 meter

 

 

Lutron HV-40 High Voltage Probe >>>> Spec sheet (PDF)

 

Operation: 
Connect the plugs to the volts ( Hi ) & com ( Lo ) input terminals of your voltmeter ( or Multimeter ). Select the desired range of voltmeter ( Attention : Do not use auto ranging ). Whenever possible, turn the high voltage source off before making any connections. Connect the HV probe common lead ( alligator clip ) to a good earth ground or reliable chassis ground.

 

About the Author

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

You may also like these