Hanna HI-98199 PH, EC, DO Digital Portable Meter

Memungkinkan pengukuran pH dan suhu saat digunakan dengan probe pH digital HI-829113 yang disertakan.
Hingga kalibrasi tiga titik dengan lima buffer standar dan satu buffer kustom tersedia
Opsi pH dalam mV berguna untuk diagnostik
Data GLP Offset, kemiringan, tanggal, waktu, dan buffer yang digunakan
Pembacaan kompensasi suhu secara otomatis
Sensor pH Berisi gel dan bebas perawatan
Sambungan ganda untuk mengurangi kontaminasi sel referensi.

Description

Hanna HI-98199 PH, EC, DO Digital Portable Meter ini dilengkapi dengan sejumlah fungsi intuitif, termasuk kemampuan logging, membuat pelacakan pengukuran menjadi mudah. Selain itu, input probe digitalnya memungkinkan koneksi probe pH, konduktivitas, atau oksigen terlarut.

Fitur Hanna HI-98199

Mengukur pH, konduktivitas, dan oksigen terlarut
Tampilan digital menunjukkan beberapa pengukuran sekaligus
Panel kontrol yang mudah digunakan dengan tombol angka
Fungsi logging memungkinkan Anda menyimpan dan meninjau data
Termasuk elektroda pH digital dengan kabel panjang
Konstruksi yang kokoh bertahan di sebagian besar lingkungan

Spesifikasi Hanna HI-98199 PH, EC DO Digital Portable Meter

pH / mV (using the included HI-829113 pH Probe)
Range		0.00 to 14.00 pH / ±600.0 mV
Resolution		0.01 pH / 0.1 mV
Accuracy		±0.02 pH / ±0.5 mV
Calibration		Automatic one, two, or three points of five standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer

EC (using HI-763093 EC Probe – buy separately)
Range		0 to 200 mS/cm
Resolution		manual: 1 μS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm; automatic: 1 μS/cm from 0 to 9999 μS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 200.0 mS/cm automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 200.0 mS/cm
Accuracy		±1.5% of reading or ±2 μS/cm whichever is greater
Calibration		Automatic single point, with six standard solutions (84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point

TDS (using HI-763093 EC Probe – buy separately)
Range		0.0 to 200.0 ppt (g/L) (the maximum value depends on the TDS factor)
Resolution		manual: 1 ppm (mg/L); 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L); 1 ppt (g/L); automatic: 1 ppm (mg/L) from 0 to 9999 ppm (mg/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 200.0 ppt (g/L) automatic ppt (g/L): 0.001 ppt (g/L) from 0.000 to 9.999 ppt (g/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 200.0 ppt (g/L)
Accuracy		±1% of reading or ±1 ppm (mg/L) whichever is greater
Calibration		based on conductivity calibration

Resistivity (using HI-763093 EC Probe – buy separately)
Range		0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm
Resolution		1 Ω•cm; 0.1 kΩ•cm; 0.0001 MΩ•cm
Calibration		based on conductivity calibration

Salinity (using HI-763093 EC Probe – buy separately)
Range		0.00 to 70.00 PSU
Resolution		0.01 PSU
Accuracy		±2% of reading or ±0.01 PSU whichever is greater
Calibration		based on conductivity calibration

Seawater σ (using HI-763093 EC Probe – buy separately)
Range		0.0 to 50.0 σt, σ₀, σ₁₅
Resolution		0.1 σt, σ₀, σ₁₅
Accuracy		±1 σt, σ₀, σ₁₅
Calibration		based on conductivity calibration

Dissolved Oxygen (using HI-764103 DO Probe – buy separately)
Range		0.0 to 500.0%; 0.00 to 50.00 ppm (mg/L)
Resolution		0.1%; 0.01 ppm (mg/L)
Accuracy		0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading; 0.00 to 30.00 ppm (mg/L): ±1.5% of reading or ±0.10 ppm (mg/L), whichever is greater; 30.00 ppm (mg/L) to 50.00 ppm (mg/L): ±3% of reading
Calibration		automatic one or two points at 0, 100% or one custom point

Atmospheric Pressure (using HI-764103 DO Probe – buy separately)
Range		450 to 850 mm Hg; 17.72 to 33.46 in Hg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Resolution		0.1 mm Hg; 0.01 in Hg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Accuracy		±3 mm Hg within ±15°C
Calibration		automatic at one custom point

Temperature
Range		-5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K
Resolution		0.01°C; 0.01°F; 0.01K
Accuracy		±0.15°C; ±0.27°F; ±0.15K
Calibration		automatic at one custom point

Additional specifications
Temp compensation		automatic from -5 to 55°C (23 to 131°F)
Logging Memory		45000 records (continuous logging or log-on-demand)
Logging Interval		one second to three hours
PC Connectivity		via USB (with Hanna PC software)
Environment		0 to 50°C (32 to 122°F); RH 100% IP67
Battery Type / Life		1.5V AA batteries (4) / approximately 400 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight		185.0 x 93.0 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
Ordering Information		HI-98199 is supplied with the HI-829113 pH digital probe with 4m (13’) cable, pH calibration solution sachets, PC software, micro USB cable, batteries, quality certificate, and instruction manual in a rugged carrying case.
Probes		HI-829113 pH digital probe with 4m (13’) cable (supplied); HI-763093 EC digital probe with 4m (13’) cable (buy separately); HI-764103 DO digital probe with 4m (13’) cable (buy separately)
Accessories		HI-710034 orange protective silicone rubber boot